Projnut Inner Barrel Clamp
Price: $42.52 — In stock at 1 retailer.
Prices last checked July 30, 2026 across 1 retailer.
We consider this a mandatory upgrade to ensure stability and alignment of the inner barrel. This part is now INCLUDED WITH THE GENESIS KITS. Brass barrel clamp nut to replace part #9. Firmly connects the inner barrel to the hop unit, keeps the barrel centred and aligned in the hop unit. Compatible with standard KC-02 hop units and Genesis hop units. The hop unit is not included! We consider this part to be an essential upgrade to all KC-02's from now on. Installation video guide here. And another tip here if it's twisting during assembly . Do not over-tighten the clamp nut. The clamp works mostly on friction, it does not need to bite into the metal. Our testing showed a torque of about 7nm is more than sufficient, this is barely more than finger-tight with a small spanner. The KC-02 has always had a problem with the hop rubber and inner barrel being able to twist slightly inside the hop unit because the barrel nut only holds the hop rubber into the hop unit and doesn't actually grip the inner barrel itself, which is true of both the standard and Genesis hop units. This isn't normally a problem if you're very careful to keep your barrel aligned when installing it into the outer barrel and attaching it to the receiver. We figured out a while ago that if we wanted to incorporate a barrel clamp into the Genesis hop unit design, we would probably have to dramatically change the design if we still wanted to re-use the existing barrel nut and add in some little grub screws or something to grip the inner barrel. But then, one day, a hydro-mancer named Project came up with the idea to use a compression fitting like an olive nut which is common in plumbing applications to add a simple barrel clamp to the barrel nut itself! Such a beautifully simple idea that could be added to both the Genesis hop unit and the standard hop unit! So the ProjNut was born! We designed it and had it made in brass, as is fitting of its origins. You simply install the ProjNut as you would do with th
Projnut Inner Barrel Clamp price comparison: the lowest price is $42.52 at Rogueworx, and the median across 1 tracked listing is $42.52.
Compatible with: KC-02
Which inner barrel fits AEG? Compare length, bore & prices →
Where to buy the Projnut Inner Barrel Clamp: prices at 1 retailer
- Rogueworx: $42.52 — In Stock
Frequently asked questions about the Projnut Inner Barrel Clamp
- How much does the Projnut Inner Barrel Clamp cost?
- The Projnut Inner Barrel Clamp ranges from $42.52 across 1 retailer. The lowest current price is at Rogueworx. Prices are updated regularly from each store's live catalog.
- Where can I buy the Projnut Inner Barrel Clamp?
- The Projnut Inner Barrel Clamp is currently in stock at 1 retailer including Rogueworx. We track availability across 1 airsoft stores and update stock status regularly.
- Is the Projnut Inner Barrel Clamp a good aeg inner barrels upgrade?
- The Projnut Inner Barrel Clamp by ROGUEWORX LTD is listed in our AEG Inner Barrels category and is priced from $42.52. We aggregate prices from 1 retailer so you can compare and find the best deal. Check the price comparison table above for current pricing from each store.
More AEG Inner Barrels parts to compare
- Action Army AAP01 TIGHT BORE Inner Barrel 129mm — compare across 4 retailers
- Guarder Black Edition Inner Barrel for MARUI V10/Detonics — compare across 4 retailers
- Airtech Studios IBS Inner Barrel Stabilizer for Krytac Kriss Vector — compare across 4 retailers
- Alpha Parts 11.5 inch High Precision Barrel Set for Systema PTW M4 Series — compare across 3 retailers
- ARES Amoeba Striker Series 6.03mm Inner Barrel (310mm) — compare across 3 retailers
- Guarder Inner Barrel Block Ring For MARUI Gold Match/Detonics — compare across 3 retailers
- 6.03MM EG Barrel 247mm — compare across 3 retailers
- Maple Leaf 6.02mm Diameter AEG Inner Barrel (250MM) — compare across 3 retailers